Shanli SL-C95 Resin-Based Porous Carbon is a porous carbon material prepared from resin through high-temperature carbonization and activation. It features controllable micropore structure, higher pore volume, higher specific surface area, and zero macroporosity. It will not collapse or deform under pressure, offering ample space and robust structural support for silicon deposition.
رقم الصنف :
SL-C95ميناء الشحن :
Shanghai,Ningbo,Tianjin etc.مهلة :
3-5 daysمظهر :
Blackشكل :
PowderyPore Volume :
≥0.95 cm³/gPore Volume Percentage (0.35-2nm) :
≥82%（0.35-2nm）
SL-C95 the porous carbon carrier for silicon-carbon anode
SHANLI Resin-Based Porous Carbon
SHANLI SL-C95 offers higher pore volume (≥0.95 cm³/g) and specific surface area (≥1950 m²/g), with controllable micropore structure, zero macroporosity, and high crush strength (≥200 MPa), providing ample space and robust structural support for silicon deposition.
Designed for silicon-carbon anode systems with higher capacity requirements, it enables longer cycle life and higher energy density lithium-ion batteries.
Applications of Porous Carbon
| Application Area | Specific Scenario | Key Features |
| Consumer Electronics | Smartphones, Laptops | High energy density for extended battery life, lightweight & thin design, increased cycle life |
| Power Batteries | Electric vehicles, Power tools | High rate capability for fast charge/discharge, increased cycle life, enhanced safety |
| Energy Storage Systems | Home energy storage, Grid frequency regulation | Ultra-long cycle life, cost control, wide temperature adaptability |
| Other Applications (Under Development) | ||
Our Certificates
Caution
1. It should be sealed to avoid of contamination and adsorption of water or other gas and vapors.
2. Storage in a dry warehouse is recommended.
Shanli SL-C85 Resin-Based Porous Carbon is a porous carbon material prepared from resin through high-temperature carbonization and activation. It features uniformly distributed micropores, high pore volume, high specific surface area, and zero macroporosity. It will not collapse or deform under pressure, providing stable structural support for silicon deposition.
عرض المزيد
Shanli SL-C95 Resin-Based Porous Carbon is a porous carbon material prepared from resin through high-temperature carbonization and activation. It features controllable micropore structure, higher pore volume, higher specific surface area, and zero macroporosity. It will not collapse or deform under pressure, offering ample space and robust structural support for silicon deposition.
عرض المزيد
يرجى مواصلة القراءة، والبقاء على اطلاع، والاشتراك، ونحن نرحب بك لتخبرنا بما تفكر فيه.
حقوق الطبع والنشر
@ 2026 شركة تشيتشو شانلي للمنخل الجزيئي المحدودة جميع الحقوق محفوظة.
الشبكة المدعومة
Hi! Click one of our members below to chat on
